Natural Oil Gel Stain

Instructions

Before you begin:

Stir carefully before use. Do a test beforehand in a discreet place to check if the color and effect obtained are those desired. The final result will be determined by the natural color of the wood species used.

Surface preparation:

• The wood, metal or fiberglass surface must be clean, dry and free of all dirt in order for the stain to adhere or to penetrate well.
• Ensure that the piece to be stained is properly sanded with a 120 – 150 grit sandpaper.

Application:

• Pour a small amount of stain onto the sponge included in the SamaN Stain Kit (60 – 002).
• Rub following the direction the wood grain.
• Wipe off the excess with a clean and soft cloth.
• Work in small sections to prevent the stain from drying between applications.
• Seal and protect your work with a clear SamaN’s satin, semi-gloss, gloss or matte finish varnish.

Drying time:

• 1 hour
• 2 hours before applying a varnish.

Cleaning tools:

Clean all tools and equipment with SamaN’s Oil and Wax Eliminator. Dispose of all empty containers and unused stain in accordance with local, provincial and federal regulations.

Contenues téléchargeables

Downloadable content